SRS15WN[SS,​SSHH,​UU]C1+[76-900/1]LM THK Miniature Linear Guide Caged Ball SRS Series

Brand Name:THK
Model Number:SRS15WN[SS,​SSHH,​UU]C1+[76-900/1]LM
d:110 mm
D:150 mm
B:20 mm
d1:122.4 mm
d2:119 mm
D1:137.51 mm
b:2.3 mm
C1:10.9 mm
PDF SRS15WN[SS,​SSHH,​UU]C1+[76-900/1]LM

Product Details

d110 mm
D150 mm
B20 mm
d1122.4 mm
d2119 mm
D1137.51 mm
b2.3 mm
C110.9 mm
C23.5 mm
C33 mm
r1,2 min.1.1 mm
r3,4 min.0.6 mm
a42.7 mm
da min.116 mm
db min.113.2 mm
Da max.144 mm
Db max.146.8 mm
ra max.1 mm
rb max.0.6 mm
dn125.4 mm
Basic dynamic load rating C37.7 kN
Basic static load rating C032.5 kN
Fatigue load limit Pu1.18 kN
Attainable speed for grease lubrication12300 r/min
Attainable speed for oil-air lubrication19000 r/min
Ball diameter Dw12.7 mm
Number of balls z26
Reference grease quantity Gref11 cm³
Preload class A GA340 N
Static axial stiffness, preload class A221 N/µm
Preload class B GB1030 N
Static axial stiffness, preload class B334 N/µm
Preload class C GC2070 N
Static axial stiffness, preload class C441 N/µm
Calculation factor f1.2
Calculation factor f10.98
Calculation factor f2A1
Calculation factor f2B1.04
Calculation factor f2C1.08
Calculation factor fHC1.01
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing0.7 kg
View more

Company Profile

Phone 63-2-759-4409
View more

Related News

  • PROS and CONS of Ball Bearing Turbochargers - ProSep 10, 2018 — Ball Bearing Turbochargers are a latest rage in the automotive world right now… hydrodynamic and full-floating journal bearing systems (being  Ball Bearing VS Journal...
  • Bearing mounting | Basic Bearing Knowledge | Koyo BearingsMounting procedures depend on the type and fitting conditions of bearings. For general bearings in which the shaft rotates, an interference fit is applied to inner  Proper way to insert...
  • (PDF) Comparison of methods for adjusting and controllingthe bearing and the preload force is transmitted via a special sleeve [4]. The latter moves in. the housing, whereby the position of the bearings can be adjusted to  The importance of...
  • Recommended Products

    All Products Contact Now